top of page

2100 180° Direct Drive

Pump Features:

• 2100 series straight through T&E cast housing with 2” inlet & outlet

• Available with optional nitrided housing, Teflon seals

• 2” threaded flanges

• 4” helical-cut, nitrided steel gears

• Requires a minimum 2” hose & fitting

Part Numbers:

513WD   2” T&E 180° with direct drive hydraulic motor mount

Horsepower Requirements:

• Hydraulic Motor 20hp with SAE "A" mount - 104 Series recommended 

Recommended Operating Procedures:

• Maximum Temp: 212°F (regular seals)

• Maximum RPM: 750 RPM at the pump      

• Maximum Pressure: 125 PSI

Note: Hydraulic Motor/ System to be ran within the manufacturers recommended specifications. Some Hydraulic motors may not allow for the maximum pump capabilities.
Note: Pump pressure is maximum safe operating pressure, not the maximum pressure the pump will produce.
Installation Dimensions:

4000 180° Direct Drive

Pump Features:

• 4000 series straight through T&E cast housing with 4” inlet & outlet
• Available with optional nitrided housing, Teflon seals
• 4” steel weld flanges
• 6” helical-cut, nitrided steel gears
• Requires a minimum 3” hose & fitting

Part Numbers:

• 110WD   4” T&E 180° with direct drive hydraulic motor mount

Horsepower Requirements:

• Hydraulic Motor 30-40hp, with SAE "B" mount - 109 Series recommended

Recommended Operating Procedures:

• Maximum Temp: 212°F (regular seals)

• Maximum RPM: 750 RPM at the pump      

• Maximum Pressure: 125 PSI

Note: Hydraulic Motor/ System to be ran within the manufacturers recommended specifications. Some Hydraulic motors may not allow for the maximum pump capabilities.
Note: Pump pressure is maximum safe operating pressure, not the maximum pressure the pump will produce.
Installation Dimensions:

4000R 90° Direct Drive

Pump Features:

• Small body right angle T&E cast housing with 4” inlet & outlet
• Available with optional nitrided housing, Teflon seals
• 4” steel weld flanges
• 7.5” helical-cut, nitrided steel gears
• Requires a minimum 3” hose & fitting

Part Numbers:

114RWD   4” T&E 90° with direct drive hydraulic motor mount

Horsepower Requirements:

• Hydraulic Motor 30-40hp with SAE "B" mount - 109 Series recommended

Recommended Operating Procedures:

• Maximum Temp: 212°F (regular seals)

• Maximum RPM: 750 RPM at the pump     

• Maximum Pressure: 125 PSI

Note: Hydraulic Motor/ System to be ran within the manufacturers recommended specifications. Some Hydraulic motors may not allow for the maximum pump capabilities.
Note: Pump pressure is maximum safe operating pressure, not the maximum pressure the pump will produce.
Installation Dimensions:

4100 180° Direct Drive

Pump Features:

• 4100 series straight through T&E cast housing with 5” inlet & outlet
• Available with optional nitrided housing, Teflon seals
• 5” steel weld flanges
• 7.25” helical-cut, nitrided steel gears
• Requires a minimum 4” hose & fitting

Part Numbers:

216WD   5” T&E 180° with direct drive hydraulic motor mount

• Hydraulic Motor 30-40hp, with SAE "B" mount - 109 Series recommended

Horsepower Requirements:
Recommended Operating Procedures:

• Maximum Temp: 212° F (regular seals)

• Maximum RPM: 750 RPM at the pump      

• Maximum Pressure: 125 PSI

Installation Dimensions:

“Our mission is to Design & Manufacture pumps that consider the users, the industry and environment and to provide great service to our customers”

CONTACT US

Call: 844 577 3825
Email: admin@tepumps.com
Visit: 6566 Township Road 370

Consort, AB, Canada 

T0C1B0

bottom of page