top of page

2100 180° Outboard

Pump Features:

• straight through T&E cast housing with 2” inlet & outlet

• Available with optional nitrided housing, Teflon seals

• 2” threaded flanges

• 4” helical-cut, nitrided steel gears

• Requires a minimum 2” hose & fitting

Part Numbers:

513W-OBF   2” T&E 180° with outboard gear case assembly

Horsepower Requirements:

• Hydraulic Motor 20hp - 104 Series recommended

• Electric Motor 5-10hp with 440VFD

Recommended Operating Procedures:

• Maximum Temp: 212°F (regular seals)

• Maximum RPM: 750 RPM at the pump

• Maximum Pressure: 125 PSI

Note: Pump pressure is maximum safe operating pressure, not the maximum pressure the pump will produce.
Installation Dimensions:

4000 180° Outboard

Pump Features:

• straight through T&E cast housing with 4” inlet & outlet
• Available with optional nitrided housing, Teflon seals
• 4” steel weld flanges
• 6” helical-cut, nitrided steel gears
• Requires a minimum 3” hose & fitting

Part Numbers:

110W-OBF   4” T&E 180° with outboard gear case assembly

Horsepower Requirements:

• Hydraulic Motor 30-40hp with SAE "B" mount - 109 Series recommended

• Maximum Temp: 212°F (regular seals)

• Maximum RPM: 750 RPM at the pump

• Maximum Pressure: 125 PSI

Recommended Operating Procedures:
Note: Pump pressure is maximum safe operating pressure, not the maximum pressure the pump will produce.
Installation Dimensions:

4000R 90° Outboard

Pump Features:

• Small body right angle T&E cast housing with 4” inlet & outlet
• Available with optional nitrided housing, Teflon seals
• 4” steel weld flanges
• 7.5” helical-cut, nitrided steel gears
• Requires a minimum 3” hose & fitting

114RW-OBF   4” T&E 90° with outboard gear case assembly

Part Numbers:
Horsepower Requirements:

• Hydraulic Motor 30-40hp with SAE "B" mount - 109 Series recommended

• Electric Motor 15-20hp with 440 VFD

Recommended Operating Procedures:

• Maximum Temp: 212°F (regular seals)

• Maximum RPM: 750 RPM at the pump

• Maximum Pressure: 125 PSI

Note: Hydraulic Motor/ System to be ran within the manufacturers recommended specifications. Some Hydraulic motors may not allow for the maximum pump capabilities.
Note: Pump pressure is maximum safe operating pressure, not the maximum pressure the pump will produce.
Installation Dimensions:

4100 180° Outboard

Pump Features:

• straight through T&E cast housing with 4.5” inlet & outlet
• Available with optional nitrided housing, Teflon seals
• 5” steel weld flanges
• 7.25” helical-cut, nitrided steel gears
• Requires a minimum 4” hose & fitting

216W-OBF   5” T&E 180° with outboard gear case assembly

Part Numbers:
Horsepower Requirements:

• Hydraulic Motor 50-60hp - 112 Series recommended
• Electric Motor 20hp with 440VFD

• Maximum Temp: 212°F (regular seals)

• Maximum RPM: 750 RPM at the pump

• Maximum Pressure: 125 PSI

Recommended Operating Procedures:
Installation Dimensions:
bottom of page