top of page

T&E Pumps - Outboard Series

T&E Outboard Pumps are all the same concept as our standard pumps, with the same great efficiency and superior sealing system.  The intention of these pumps is to provide extra life when experiencing a higher amount of solids that you typically see.  The external gear drive prevents the internal gears from touching thereby reducing wear on a part that has a high cost to replace.  These pumps must be ran with an oil lubrication system.  To see if an outboard pump is right for you please contact us and speak with a Customer Service Representative.

2100 Outboard Pump (513W-OBF)
2100 (180°) Outboard Pump Features:
• 2100 series straight through T&E cast housing with 2” inlet & outlet.
• Available with optional nitrided housing, Teflon seals.
• 2” threaded flanges.
• 4” helical-cut, nitrided steel gears.
• Requires a minimum 2” hose & fitting.
2100-513W-OBF-HI RES.jpg
Part Numbers:
• 513W-OBF   
2” T&E 180° with outboard gear case assembly.
Horsepower Requirements:
• Hydraulic Motor 20hp.
            o 104 Series Recommended.
• Electric Motor 5-10hp with 440VFD.
Recommended Operating Procedures:
• Maximum Temp: 
• Maximum RPM: 
• Maximum Pressure:
212°F (regular seals).
750 RPM at the pump.
125 PSI. 
o Note: Pump pressure is maximum safe operating pressure, not the maximum pressure the pump will produce.
Installation Dimensions:
513W-OBF REVA INSTALLATION DIMS.png
4000 Outboard Pump (110W-OBF)
4000 (180°) Outboard Pump Features:
• 4000 series straight through T&E cast housing with 4” inlet & outlet.
• Available with optional nitrided housing, Teflon seals.
• 4” steel weld flanges.
• 6” helical-cut, nitrided steel gears.
• Requires a minimum 3” hose & fitting.
4000-110W-OBF-HI RES.jpg
Part Numbers:
• 110W-OBF          4” T&E 180° with outboard gear case assembly.
Horsepower Requirements:
• Hydraulic Motor 30-40hp.
            o 109 Series Recommended.
• Electric Motor 15-20hp with 440 VFD.
Recommended Operating Procedures:
• Maximum Temp: 
• Maximum RPM: 
• Maximum Pressure:
212°F (regular seals).
750 RPM at the pump.
125 PSI. 
o Note: Pump pressure is maximum safe operating pressure, not the maximum pressure the pump will produce.
Installation Dimensions:
110W-OBF-INSTALLATION DIMS.png
4000R Outboard Pump (114RW-OBF)
4000R (90°) Outboard Pump Features:
• Small body right angle T&E cast housing with 4” inlet & outlet.
• Available with optional nitrided housing, Teflon seals.
• 4” steel weld flanges.
• 7.5” helical-cut, nitrided steel gears.
• Requires a minimum 3” hose & fitting.
4000R-114RW-OBF-HI RES.jpg
Part Numbers:
• 114RW-OBF       4” T&E 90° with outboard gear case assembly.
Horsepower Requirements:
• Hydraulic Motor 30-40hp.
            o 109 Series Recommended.
• Electric Motor 15-20hp with 440 VFD.
Recommended Operating Procedures:
• Maximum Temp: 
• Maximum RPM: 
• Maximum Pressure:
212°F (regular seals).
750 RPM at the pump.
125 PSI. 
o Note: Pump pressure is maximum safe operating pressure, not the maximum pressure the pump will produce.
Installation Dimensions:
114RW-OBF Installation DIMS.png
4100 Outboard Pump (216W-OBF)
4100-216W-OBF-HI RES.jpg
4100 (180°) Outboard Pump Features:
• 4100 Series 18 T&E cast housing with 4.5” inlet & outlet.
• Available with optional nitrided housing, Teflon seals.
• 5” steel weld flanges.
• 7.25” helical-cut, nitrided steel gears.
• Requires a minimum 4” hose & fitting.
Part Numbers:
• 216W-OBF        5” T&E 180° with outboard gear case assembly.
Horsepower Requirements:
• Hydraulic Motor 50-60hp.
            o 112 Series Recommended.
• Electric Motor 20hp with 440VFD.
Recommended Operating Procedures:
• Maximum Temp: 
• Maximum RPM: 
• Maximum Pressure:
212°F (regular seals).
750 RPM at the pump.
125 PSI. 
o Note: Pump pressure is maximum safe operating pressure, not the maximum pressure the pump will produce.
Installation Dimensions:
216W-OBF-INSTALLATION DIMS.png
bottom of page