top of page
2100 Direct Drive Pump (513WD)
2100 (180°) Direct Drive Pump Features (513WD):
• 2100 series straight through T&E cast housing with 2” inlet & outlet.
• Available with optional nitrided housing, Teflon seals.
• 2” threaded flanges.
• 4” helical-cut, nitrided steel gears.
• Requires a minimum 2” hose & fitting.
Part Numbers:
• 513WD
2” T&E 180° with direct drive hydraulic motor mount.
Horsepower Requirements:
• Hydraulic Motor 20hp, with SAE "A" mount.
o 104 Series Recommended.
Recommended Operating Procedures:
• Maximum Temp:
• Maximum RPM:
• Maximum Pressure:
212°F (regular seals).
750 RPM at the pump.
125 PSI.
o Note: Hydraulic Motor/ System to be ran within the manufacturers recommended specifications. Some Hydraulic motors may not allow for the maximum pump capabilities.
o Note: Pump pressure is maximum safe operating pressure, not the maximum pressure the pump will produce.
Installation Dimensions:
4000 Direct Drive Pump (110WD)
4000 (180°) Direct Drive Pump Features:
• 4000 series straight through T&E cast housing with 4” inlet & outlet.
• Available with optional nitrided housing, Teflon seals.
• 4” steel weld flanges.
• 6” helical-cut, nitrided steel gears.
• Requires a minimum 3” hose & fitting.
Part Numbers:
• 110WD 4” T&E 180° with direct drive hydraulic motor mount.
Horsepower Requirements:
• Hydraulic Motor 30-40hp, with SAE "B" mount.
o 109 Series Recommended.
Recommended Operating Procedures:
• Maximum Temp:
• Maximum RPM:
• Maximum Pressure:
212°F (regular seals).
750 RPM at the pump.
125 PSI.
o Note: Hydraulic Motor/ System to be ran within the manufacturers recommended specifications. Some Hydraulic motors may not allow for the maximum pump capabilities.
o Note: Pump pressure is maximum safe operating pressure, not the maximum pressure the pump will produce.
Installation Dimensions:
4000R Direct Drive Pump (114RWD)
4000R (90°) Direct Drive Pump Features:
• Small body right angle T&E cast housing with 4” inlet & outlet.
• Available with optional nitrided housing, Teflon seals.
• 4” steel weld flanges.
• 7.5” helical-cut, nitrided steel gears.
• Requires a minimum 3” hose & fitting.
Part Numbers:
• 114RWD 4” T&E 90° with direct drive hydraulic motor mount.
Horsepower Requirements:
• Hydraulic Motor 30-40hp, with SAE "B" mount.
o 109 Series Recommended.
Recommended Operating Procedures:
• Maximum Temp:
• Maximum RPM:
• Maximum Pressure:
212°F (regular seals).
750 RPM at the pump.
125 PSI.
o Note: Hydraulic Motor/ System to be ran within the manufacturers recommended specifications. Some Hydraulic motors may not allow for the maximum pump capabilities.
o Note: Pump pressure is maximum safe operating pressure, not the maximum pressure the pump will produce.
Installation Dimensions:
4100 Direct Drive Pump (216WD)
4100 (180°) Direct Drive Pump Features:
• 4100 Series 180° T&E cast housing with 5” inlet & outlet.
• Available with optional nitrided housing, Teflon seals.
• 5” steel weld flanges.
• 7.25” helical-cut, nitrided steel gears.
• Requires a minimum 4” hose & fitting.
Part Numbers:
• 216WD 5” T&E 180° with direct drive hydraulic motor mount.
Horsepower Requirements:
• Hydraulic Motor 30-40hp, with SAE "B" mount.
o 109 Series Recommended.
Recommended Operating Procedures:
• Maximum Temp:
• Maximum RPM:
• Maximum Pressure:
212°F (regular seals).
750 RPM at the pump.
125 PSI.
o Note: Hydraulic Motor/ System to be ran within the manufacturers recommended specifications. Some Hydraulic motors may not allow for the maximum pump capabilities.
o Note: Pump pressure is maximum safe operating pressure, not the maximum pressure the pump will produce.
Installation Dimensions:
bottom of page